ITA Magnetic Level Gauge

What is a magnetic type level gauge?

 

A magnetic Level Gauge is also called a magnetic level indicator. Magnetic Level Gauge is developed based on the principle of buoyancy and magnetic effect. The magnetic float in the measuring cylinder drives the two-color turning column on the external display of the measuring cylinder to flip with the increase (decrease) of the liquid level to be measured. As the position of the float changes, the indicator moves up and down the same amount. Supports top-mounted and side-mounted. It can be used for liquid level detection in high temperature, low temperature, high pressure, strong corrosion, highly toxic and dangerous environments.

Magnetic Level Gauge Specification:

 

 

In order to meet the needs of different occasions, environments, and functions, Magnetic Level Gauge can add the following options:

Optional single-pole single-throw (SPST), single-pole double-throw (SPDT) passive bistable magnetic switches to achieve high and low liquid level, interface control or alarm. The number of magnetic switches is not limited.

Optional two-wire magnetic liquid level sensor, output 4~20mADC signal, realize remote measurement and control,

The top and bottom structure of the level gauge are selected. Output 4~20mADC with HART protocol

 

How does magnetic level gauge work?

The Magnetic Level Gauge adopts the principle of the communicating device and is connected to the container through the gas-phase and liquid-phase connection flanges. According to the principle of buoyancy and magnetic coupling, the magnetic float in the measuring cylinder (that is, the communicating device) drives the two-color flipping column on the external display of the measuring cylinder to flip with the increase (decrease) of the liquid level to be measured.

 

When the liquid level rises, the magnetic float drives the turning column to rotate 180°, displaying red or green; when the liquid level drops, the magnetic float drives the turning column to rotate 180° in reverse, displaying white. The height of the red band (or green band) is the height of the measured liquid surface, which realizes the purpose of measuring and displaying the position of the measured liquid (interface) surface.

 

Each magnetic turning column is a two-color axial symmetric structure. The distance between the two magnetic turning columns is 10mm. White and red (or green) are used to indicate the gas phase and the liquid phase, and the red (or green) and white junctions It is the boundary between the liquid phase and the gas phase.

 

Magnetic Level Gauge can measure both the liquid level and the interface between two different density media.

 

Magnetic Level Gauge Float Design:

The working principle of the magnetic level gauge is to communicate with the container, so the liquid level in the measuring chamber will be the same as the liquid level in the container. The measuring chamber is equipped with a float, and there is a magnet in the float.

The float with magnets will float on the medium, and the magnets in the float will rotate the flaps of the indicating rail. The float in the measuring tube is standard, there is no pressure, no magnetism, or mechanical guidance.

This structure makes the risk of the float lower than that of the standard pressurized float. When necessary, pressurized floats can be produced.With the below-mentioned process conditions, it is possible to select a float that will float on the medium.

Medium

Density

Working pressure

Operating Temperature